Features:
DJI FlyCart 30 is here to deliver the goods. A long-distance heavy lifter with powerful signal and intelligence, DJI FlyCart 30 supports Cargo mode and Winch mode and ascends beyond traditional logistical limits to deliver a safe, economical, and efficient air transport solution.
30 kg Max Payload [1] 28 km Flight Distance Without Payload [2] 16 km Flight Distance with Full Payload [3] 20 m/s Max Speed [4] The first three indicators are measured in dual battery mode
6,000 m Max Flight Altitude [5] -20° to 45° C (-4° to 113° F) Operating Temperature [6] 12 m/s Max Wind Speed Resistance [7]
20 km Video Transmission with O3 [8] 4G Enhanced Video Transmission [9] Dual Operator Mode [10] High-Resolution FPV Gimbal Camera
IP55 Protection and Corrosion Resistance [11] Radars, Binocular Vision, Intelligent Obstacle Sensing [12] Dual Batteries and Parachute
Foldable
70 L EPP Case [13]
Winch System
DJI Pilot 2
DJI DeliveryHub
Health Management System
Heavy payload capacity and long flight distance overcome logistical limitations fornext-generation delivery.
Max Payload (Dual Batteries) [1]
Max Payload (Single Battery) [1]
Max Flight Distance Without Payload (Dual Batteries) [2]
Max Flight Distance with Full Payload (Dual Batteries) [3]
Max Flight Speed
(with Carbon Fiber Propellers) [4]
Cruising Speed[4]
Withstand round-the-clock operations across extreme altitudes and weather conditions.
Max Flight Altitude[5]
Operating Temperature[6]
Protection Rating[11]
Max Wind Speed Resistance[7]
DJI FlyCart 30 is equipped with Front and Rear Phased Array Radars and a dual Binocular Vision system to achieve Intelligent Multidirectional Obstacle Sensing. [12] A built-in ADS-B signal receiver detects and warns of nearby crewed aircraft.
DJI FlyCart 30 is designed with high redundancy to guarantee flight safety even in harsh environments.
Powered by a dual battery system, if a single battery fails during flight, the other battery will keep the drone flying and ensure a safe return.
Learn more about DJI FlyCart 30’s redundant systems in this report
DJI FlyCart 30 supports DJI O3 video transmission over up to 20 km. [8] Its four-antenna transceiver system intelligently selects the optimal antenna to transmit signals and enhance anti-interference capabilities. Bolster connection and stability with a DJI Cellular Dongle, [15] which can work in tandem with DJI O3 video transmission. If O3 video transmission experiences interference, the 4G network can maintain signal stability and video transmission, improving flight safety even in complex environments.
DJI RC Plus has a 7-inch high-bright screen and supports Dual Operator mode[10]. This mode allows two operators to conveniently transfer control permissions to meet diverse operation requirements.
Water and dust resistant
Capable in extreme environments
70 L Max Capacity[17] 30 kg Max Payload (Dual Batteries)[1] 40 kg Max Payload (Single Battery)[1]
DJI FlyCart 30 comes standard with an EPP case [13] that supports easy loading and unloading.
Weight and center-of-gravity detection ensures balanced cargo loading for safe and stable flight.
30 kg Max Payload (Dual Batteries)[1]
40 kg Max Payload (Single Battery)[1]
0.8 m/s Max Cable Speed
20 m Max Cable Length
*Winch System Kit is sold separately
Winched cargo is delivered by a retractable cable which can be controlled either manually or automatically. Cargo releases automatically upon touchdown and does not require manual detachment, ensuring safe and precise delivery.
DJI FlyCart 30 can intelligently adjust its attitude to minimize cargo swing and improve stability. For extreme situations where hanging cargo gets trapped or tangled, you have the option to heat and cut the winch cable, freeing the drone.
DJI Pilot 2 displays real-time flight status, cargo status, and other interactive interfaces for efficient and safe operation with DJI FlyCart 30.
Check battery level, power status, and mileage in real time, and monitor the reachability of the destination point to ensure operation safety.
DJI DeliveryHub is a one-stop air delivery management platform. It facilitates efficient operation planning, comprehensive operation status monitoring, centralized team resource management, and data collection and analysis.
Remotely create, schedule, and allocate tasks and devices.
Confirm safety check and one-tap takeoff.
Increase efficiency and automatically perform scheduled delivery tasks based on recorded flight routes.
Track drones and task status on a 2.5D Base Map[18].
Live view directly from the drone’s high resolution FPV gimbal camera to see the surrounding flight environment.
Receive alerts for abnormalities and take manual control to ensure flight safety.
Collaborate with teammates and share status notifications to multiple terminals.
Plan complex flight routes quickly based on a 2.5D Base Map[18].
Manage marked locations and alternate landing sites for efficient team collaboration and coordination.
Monitor drone health status, maintenance information, and DJI Care status.
View drone, route, and time statistics to evaluate efficiency and optimize future operations.
42.5 kg (without battery)
65 kg (with two DB2000 batteries)
95 kg (with cargo at sea level）
2200 mm
1590 x 1900 x 947 mm
(LxWxH) (arms unfolded, propellers folded)
2800x3085x947 mm
(LxWxH) (arms & propellers unfolded)
1115x760x1027 mm
(LxWxH) (arms & propellers folded)
Towards body
29 mins (dual battery mode)
15 mins (single battery mode)
*The data was collected in controlled conditions: zero altitude and a windless environment. For reference only.
18 mins (30 kg weight load, dual battery mode)
8 mins (40 kg weight load, single battery mode)
*The data was collected in controlled conditions: zero altitude and a windless environment. For reference only.
28 km (dual battery mode)
12 km (single battery mode)
*The data was collected in controlled conditions: zero altitude and windless environment, at a constant speed of 15m/s. For reference only.
18 mins (30 kg weight load, dual battery mode)
9 mins (40 kg weight load, single battery mode)
*The data was collected in controlled conditions: zero altitude and a windless environment, at a constant speed of 15 m/s. For reference only.
-20° to 45° C
IP55
RTK positioning enabled:
±10 cm horizontal, ±10 cm vertical
RTK positioning disabled:
±60 cm horizontal and ±30 cm vertical (radar enabled: ±10 cm)
RTK: GPS L1/L2, Galileo F1/F2, BeiDou B1I/B2I/B3I, Galieo E1/E5b, QZSS L1/L2
GNSS: GPS L1, BeiDou B1I, Galileo F1, Galieo E1, QZSS L1
30°
5 m/s
*The data was collected in controlled conditions: zero altitude and a windless environment, with a 30 kg payload. For reference only.
3 m/s (vertical)
5 m/s (tilted)
*The data was collected in controlled conditions: zero altitude and a windless environment, with a 30 kg payload. For reference only.
20 m/s
*The data was collected in controlled conditions: zero altitude and a windless environment, with a 30 kg payload, for reference only.
6000 m (without payload)
12 m/s
*The data was collected in controlled conditions: zero altitude and a windless environment, with a 30 kg payload. For reference only.
100x33 mm
48 rpm/V
4000 W/rotor
Carbon fiber composite
54 inch
Foldable double-blade propellers
1375 mm
8
10 m
60 Hz, automatically switch on according to ambient light
Pigeon (with DDR)-2T4R
20 km (FCC)
8 km (CE/SRRC/MIC)
*Measured with FCC compliance in unobstructed environments with typical interference. Data is for reference only. The actual transmission distance may vary depending on the environment's obstruction and interference conditions. Please pay attention to reminders in the app.
2.4000 to 2.4835 GHz
5.725 to 5.850 GHz
*Some countries or regions do not support the 5.8 GHz frequency band. Please refer to local flight laws and regulations for details.
2.400 GHz - 2.4835 GHz:
<33 dBm（FCC）
<20 dBm（CE/SRRC/MIC）
5.725 GHz - 5.850 GHz：
<33 dBm（FCC）
<30 dBm（SRRC）
<14 dBm（CE）
AES-256
Supported
RD241608RF (forward)
RD241608RB (backward)
Fixed altitude range: 1.5-200 m
Sensible distance (rear): 1.5-50 m
FOV Forward: 360° horizontal, ±45° vertical，±45°upward
Backward: ±45° horizontal, 360° vertical
Operating conditions: Available during takeoff, landing, and ascending when an obstacle is more than 1.5 m away from the aircraft
Safe distance: 3.5 m (distance between the propeller tip and obstacle when the aircraft is hovering after braking)
Sensing direction: multi-direction
1920x1440
149°
30fps
Full HD FPV Single Axis Gimbal Camera
Supported
754x472x385 mm (LxWxH)
573x416x305 mm (LxWxH)
EPP plus aluminum alloy frame
Supported
Approx. 3 kg
0-40 kg
≤ 95 kg
300x200x120 mm (LxWxH)
Approx. 2.1 kg
Approx. 1000 ms
≤ 6 m/s (at sea level, no wind)
Square
Nylon
Approx. 22 ㎡
60 m
-20° to 45° C
IP55
≥ 1 hour
Real-time record for 10 flights
Supported
Supported
Supported
Supported
A2EWI-30A
252x195x193 mm (LxWxH)
2.5 kg (without clump and couple)
1.9 kg
0.6 kg
Supported
5-30 kg (dual battery)5-40 kg (single battery)
20 m
0.8 m/s
-20° to 45° C
IP55
Supported
Supported
Supported
Supported
Supported
Supported
DB2000
38000 mAH
52.22 V
14S1P
1984.4 Wh
Approx. 11.3 kg
Plug
316x152x279 mm (LxWxH)
-20° to 45° C
5 to 15° C: 1.0C15 to 45° C: 2.5C
5700 W
Supported (when the battery temperature is below 10° C, pressing and holding the button or turning on the drone will activate the self-heating function. When the battery temperature is below 20° C, connecting the charger to the battery will activate the self-heating function. Charging and discharging in a low-temperature environment may reduce the battery's lifespan)
CHX101-7000
90-264 V AC
42-59.92 V DC
7200 W (Dual input)3600 W (Single input)
2
The feature is designed to respond to issues including overheating, overvoltage, undervoltage, short circuits, fan stalls, etc.
-20° to 45° C
Connector protection feature available
DJI RC Plus
DJI Pilot 2
2.400-2.483 GHz
5.725-5.850 GHz
-20° to 50° C
5° to 40° C
3.3 hours
2.7 hours
Use a USB-C fast charging charger with a maximum power of no less than 65 W (maximum voltage of 20 V). A DJI portable charger is recommended.
2 hours with built-in battery, 2.5 hours with built-in and external battery (shutdown status according to official charging method)
IP54
HDMI
Wi-Fi 6
2.4000-2.4835 GHz
5.150-5.250 GHz
5.725-5.850 GHz
Bluetooth 5.1
2.4000 - 2.4835 GHz
<10 dBm
GPS+Galileo+BeiDou
7.02 inch touch LCD display screen, resolution 1920*1200, brightness 1200 nits
Supported
2026/12/31
The protection rating is not permanent and may decline due to aging and wear caused by long-term use. The protection rating does not apply to the propulsion system. After a flight in rain, it is recommended to keep it idling on the ground for 1 minute to prevent corrosion or rust to afflict the propulsion system (precipitation of more than 24.9 mm within 24 hours).
Maximum route speed: 15 m/s. Maximum flight speed in S mode: 20 m/s. Maximum flight altitude: 6000 m.
Standard carbon fiber blades with optimized motor heat dissipation for more robust performance. The 4-axis 8-propeller configuration supports short-term emergency flight after single power unit failure, providing higher safety.
The propulsion system is equipped with a 4-axis coaxial design. If one motor fails, the other seven motors can still operate properly to enable DJI FlyCart 30 to land safely. During landing, you can maintain essential flight control, including control over the altitude and horizontal movements, and select a safe landing point as needed.
The Active Phased Array Radar and Binocular Vision can conduct horizontal multidirectional obstacle sensing, and it supports height detection from 0 to 200 m.
Yes. The built-in ADS-B signal receiver can detect the location information of civil planes, helicopters, and other vehicles equipped with ADS-B transmitters within a range of 15 km. The system sends warnings to the operator so that the operator can avoid a crash to ensure both flight and airspace safety.
Yes. A remote controller can be used to flexibly adjust the angle of the FPV camera.
Yes. DJI FlyCart 30 has a built-in arm-locking function. If the arms are not fully unfolded, a warning message will be displayed in DJI Pilot 2, and takeoff will be prohibited.
Cargo mode, Winch mode, and third-party payload systems developed on DJI Payload SDK.
The winch system has a descent mode and supports both manual control and automatic control. It has practical functions such as Swing Control and weighing and supports emergency Cut Cable Protection. Please contact after-sales service for repairs after using Cut Cable Protection.
If the voltage or capacity difference between two intelligent flight batteries is too large, the app will display, "The voltage difference or capacity difference between the two batteries is too large, making it impossible to take off." The parameters are as follows:
Voltage difference between two batteries: > 10 degrees: delta_V ≤ 2 V; < 10 degrees: delta_V ≤ 1 V
Capacity difference between two batteries: > 10 degrees: delta_soc ≤ 10%; < 10 degrees: delta_soc ≤ 8%
At normal temperatures, when two AC power cables are connected, it takes about 26.5 minutes to charge a single battery from 0% to 98%; it takes about 36.6 minutes to charge two batteries from 0% to 98%.
When intelligent flight batteries are stored for a long time, in order to ensure storage safety and extend battery life, the batteries will automatically turn on the "self-discharge at storage" function to discharge the battery with higher power to about 60%. Batteries may become slightly hot during discharge, which is normal.
The working temperature of intelligent flight batteries ranges from -20° to 45° C. Using batteries in low-temperature environments will reduce battery life. Please arrange your flight time reasonably. To maximize battery performance, it is recommended to heat the battery temperature above 10° C before a flight.
If the temperature of a battery is below 20° C, the battery will first activate the charging and heating function and then enter the charging process after heating.
After an intelligent flight battery is installed on a drone and the power is turned on, if the battery temperature is low, the battery will automatically turn on the self-heating function to keep the battery temperature at about 10° to 12° C.
An intelligent flight battery has a lifespan of 12 months and 1500 cycles, whichever comes first.
An intelligent flight battery has an energy of 1984.4 Wh, which cannot be carried on board according to airline requirements.
Two intelligent flight batteries can be charged at the same time, with a maximum charging power of 2 x 3600 watts for dual batteries and a maximum charging power of 5700 watts for a single battery.
To connect to a third-party generator for fast charging, select a generator with a 220 V single-phase output and a nominal power of 8 kW or above.
It is not supported currently.
It is recommended to use a standard charger. A third-party charger must support the USB Power Delivery Specification and have a power of no less than 40 watts.
It supports DJI's customized 4G IoT card and user-purchased Nano-SIM cards.
Yes. The links of 4G enhanced transmission and DJI O3 transmission are converged, and the two can be switched seamlessly.
Other DJI drones are not supported currently.
DJI FlyCart 30 can use the following three ways to obtain real-time differential data:
1. Based on app settings, DJI FlyCart 30 is connected to a D-RTK 2 mobile station (RTCM3.2) to obtain real-time differential data.
2. A remote controller can connect to the network RTK service (RTCM3.2) through a 4G network interface card (free in the first two years in the Chinese Mainland, and payment is required in the third year).
3. A remote controller can connect to custom network RTK services based on the Ntrip protocol through a 4G network interface card or WiFi hotspot (RTCM3.0/RTCM3.1/RTCM3.2 are supported).
Enter the online RTK page through the RTK settings page, and click package renewal to scan the code for payment. After successful purchase, click Activate on the network RTK page to continue using the service.
There is no limit.
1. Connect the drone to a computer and upgrade the firmware of the drone, remote controller, and D-RTK 2 mobile station through DJI Assistant 2 (Delivery Drones Series).
2. Use the DJI Pilot 2 app to upgrade the firmware of the drone, remote controller, and DJI DB2000 intelligent flight battery.
3. Go to the DJI official website to download the firmware, and then insert the SD card with the firmware package into the remote controller for an offline upgrade.
Please refer to the user manual for details.
Yes. For details, please contact dev@dji.com to obtain technical assistance.
Before exporting logs, check whether dual control has been enabled with 4G enhanced transmission. If 4G enhanced transmission is already enabled, disable 4G enhanced transmission for both remote controllers before exporting logs.
It is recommended to pull logs from the Level I page and export logs using 'custom logs' after identifying a module issue.
Level I page:
· Flight issues: All logs except for video transmission logs
· Transmission issues: Only video transmission logs
Drones supported: Currently, the DJI FlyCart 30 flight platform is supported.
There is no limit to the number of live streams. The actual usage is limited by the downlink bandwidth of the playback network.
Currently, the image from the gimbal camera of the drone is displayed.
The livestreaming recording function is not supported.
Latency depends on network conditions. If the network is in good condition, the latency is generally within one second.
It is not supported currently. If you need to use the GB28181 protocol for livestreaming, you can push the stream directly through Pilot.
DJI DeliveryHub uploads, stores, and manages data on cloud servers operated by Amazon Web Services, which are compliant with ISO/IEC 27001 security certifications.
1. Access links are protected by multiple layers of protection measures, including but not limited to WAF and one key for one device, to protect servers from attacks and prevent important information from being leaked.
2. Service hosting security: DJI DeliveryHub uses Amazon Web Services as a computing and storage service provider, which has passed ISO/IEC 27001 security certifications.
The HTTP, MQTT, and WebSocket protocols are supported. Each link is encrypted with TLS to ensure data security.
These are not supported currently.
DJI DeliveryHub uses a unified DJI account. Therefore, there is no need to create or activate an additional account.
Web pages support Windows, Mac, Android, iOS, and other operating systems. It is recommended to use Chrome, Safari, Edge, and Firefox as the browsers.
This is not supported currently.
No. Only immediate tasks are supported currently.
DJI DeliveryHub is a public cloud platform and does not support private deployment.
It supports the waypoint routes recorded by DJI FlyCart 30 and Matrice M30/M30T.
The DJI FlyCart 30 series has two versions: the Chinese Edition and Universal Edition. The Chinese Edition can only be used in the Chinese mainland, and the Universal Edition can be used in regions outside the Chinese mainland. Please consult your local after-sales center or agent for information on the regions where this product can be used.
Drones
Drones
Drones
